HomePower toolPressing toolElectric hydraulic pressing tool



Help you choose your product

The hydraulic unit incorporates an automatic retraction which returns the pistoninto its starting position when the maximum operating pressure is reached.
A manual retraction allows the user to return the piston into the starting positionin case of an incorrect crimp. The unit is equipped with a special brake whenstops the forward motion of the piston & die when the trigger is released.
The unit is equipped with a double piston pump which is characterised by arapid approach of the dies forwards the connector and a slow working motion.
The head can be smoothly turned by 350 around the longitudinal axis in order togain better access to tight corners and other difficult working areas.

Liion batteries do neither have a memory effect nor self discharge. Even afterlong periods of non operation the tool is always ready to operate. In addition wesee a lower power weight ratio with 5O% more capacity and shorter chargingcycles compare to NiMH batteries.

A Temperature sensor makes the tool stop working automatically when thetempreture over 60C under long time working, the fault signal sounds, itmeans the tool can' tcontinue work until the tempreture reduced to the normal.

ltem No:EM-60UNV

Crimping force:60KN


Cutting/Charge:70 times

Cutting range:Φ40mm(Cu/AI and armoured cable)

Crimping/Charge:160 times

Crimping range:16-300mm2

Punching/Charge:100 times

Punching range:Φ22.5-Φ61.5mm

Round punch Max. 61.5mm

Working Cycle:3-15s

Voltage/capacity:18v / 3.0Ah


Charging time:1.5hours

Package:plastic box


Crimping dies: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2

Punches&die (Type C): 22.5, 28.3,34643.2, 49.6, 61. 5mm

Blade:  1 set

Adapter for crimping:  lpc

Adapter for punching:  1pc

3/4", 16UN Draw stud:  1pc

7/16", 2OUN Draw stud:  1pc

Spacer:  1pc

Battery:  2pcs

Charger:  1pc

Sealing ring of cylinder:  1set

Sealing ring of safety valve:  1set



Thickness plastic box


Normal plastic box


Crimping die




If you have good opinions and suggestions for our products, please leave a message. We'll get back to you in time!